欧美 偷窥 清纯 综合图区

    <span id="bzdx9"></span>
  1. <progress id="bzdx9"><big id="bzdx9"></big></progress>
    <th id="bzdx9"></th>

  2. Daniel Venturi Tubes

    Daniel

    Daniel Venturi Tubes

    Daniel

    Corrosion-resistant and virtually maintenance free, Daniel™ Venturi Tubes are an ideal flow measurement solution for non-viscous fluids that contain hydrocarbons and other potentially corrosive elements, including LNG. This low-pressure metering device provides constant accuracy, greater capacity, high-pressure recovery and minimal permanent pressure loss and is available in a variety of ANSI ratings to ensure reliable, sustained performance for a variety of applications. Venturi tubes can be installed horizontally, vertically or any angle in between and have shorter upstream piping requirements to simplify installation and reduce costs.

    Specifications

    Measurement Type
    Differential pressure
    Fluid Type
    Gas, liquid hydrocarbons, air, water, vapor, steam, sludge, slurries
    Discharge Coefficient Uncertainty
    Uncertainty ±0.25-0.50%
    Line Size
    2-in to 72-in (50-mm to 1830-mm)
    Max. Operating Pressure
    ANSI 2500
    Permanent Pressure Loss
    10% to 15% of DP signal created
    Process Temperature Range
    -260°F to +1000°F (-162°Cto +538°C )
    Flange Type
    Flanged RTJ, Raised Face, Beveled End up to ANSI 2500
    Process Wetted Material
    Carbon Steel, Alloy Steel, Stainless Steel

    Features

    • Accurately measure a variety of fluids, including LNG, water, vapor, steam, gas, chemicals, slurries and sludge
    • Achieve lower permanent pressure loss (~5 to 15% of differential pressure) and greater capacity vs. other devices
    • Realize superior performance in highly corrosive environments with low susceptibility to erosion
    • Ensure reliable, sustained performance by selecting from a wide variety of materials and coatings
    • Simplify installation and reduce costs with short upstream piping requirement
    • Increase design flexibility with ability to install vertically, horizontally or at an angle
    • Virtually eliminate maintenance time and costs with no moving parts and simple configuration
    • Rely on manufacturing in strict accordance with ASME MFC-3M and ISO 5167 specifications

    Documents & Drawings

    欧美 偷窥 清纯 综合图区
      <span id="bzdx9"></span>
    1. <progress id="bzdx9"><big id="bzdx9"></big></progress>
      <th id="bzdx9"></th>